worked on scripts and mreadme
This commit is contained in:
parent
9442566665
commit
c785c06867
@ -13,6 +13,8 @@ JOB="@reboot /bin/sh /startup.sh"
|
||||
|
||||
git clone https://gitea.eggtech.net/eggman20339/CNSA-276-FP.git /CNSA/CNSA-276-FP/
|
||||
|
||||
sudo chmod 777 /CNSA/CNSA-276-FP/startup.sh
|
||||
|
||||
echo "Installation Complete! Rebooting..."
|
||||
sleep 2
|
||||
sudo reboot 0
|
29
readme.md
Normal file
29
readme.md
Normal file
@ -0,0 +1,29 @@
|
||||
# Welcome
|
||||
|
||||
### This project is a Door access system built on RPIs
|
||||
|
||||
#### Getting Started
|
||||
|
||||
1) Start by installing the latest version of raspianOS on your Raspberry Pi
|
||||
1) Get Raspberry Pi Imager from the web
|
||||
2) Launch it
|
||||
3) Choose your model
|
||||
4) Choose OS (Raspberry PI OS 64-bit)
|
||||
5) Select your SD card
|
||||
6) Press Ctrl+Shift+X
|
||||
7) Set a hostname
|
||||
8) Set a username and password
|
||||
9) Set locale settings
|
||||
10) Press Save
|
||||
11) Press the "Next" button
|
||||
12) Continue through any further prompts, keeping all settings that were set
|
||||
2) Boot the Raspberry Pi
|
||||
3) Open a command prompt on a seperate computer
|
||||
4) Ping the hostname set in 1.vii to find the IPv4 address (might need `-4` flag)
|
||||
5) SSH into the RPI (Raspberry Pi)
|
||||
6) run `git clone https://gitea.eggtech.net/eggman20339/CNSA-276-FP.git`
|
||||
7) run `sudo chmod 777 CNSA/CNSA-276-FP/install.sh && ./CNSA/CNSA-276-FP/install.sh`
|
||||
8) The script should take care of the rest, the RPI will restart and then auto start the program
|
||||
9) after reboot, to edit the config, SSH back in and navigate to `/CNSA/CNSA-276-FP/`
|
||||
10) run `nano config.ini`
|
||||
11) alter any config needed
|
Loading…
Reference in New Issue
Block a user